Installation guide

41
ESC-2
The ESC-2 Ethernet to Serial Converter provides a
convenient way to add two RS-232 ports to an RTI XP
series control processor. Wire the ESC-2 to the local
Ethernet network with standard cat-5 cable and it will
offer full two-way control, as if the device was wired
directly to the control processor. Two RJ-45 jacks
provide efficient cat5 cabling between the ESC-2 and the
device being controlled.
Part #: 10-210467-21
• Provides two additional serial ports to an RTI control processor.
• Use multiple ESC-2 modules for virtually unlimited control of serial
devices.
• Integrates seamlessly into Integration Designer.
• Can be discovered and congured by Integration Designer over
Ethernet.
• Easy wiring to devices using cat-5 cable - Includes two RJ-45 to
serial adapters
Key Features
Specifications
Power Supply .................................................................................+5VDC, 1A
Serial (RS-232) Ports .....................................................................Two, RJ-45
................................................................Includes two RJ-45 to DB9 adapters
Ethernet Port ................................................................................. One, RJ-45
Enclosure ....................................................................................... ABS plastic
Mounting .............................................................. Wall-mount or free standing
Dimensions (W x H x D) ...................................................................................
....................................... With Tabs 2.8” (71mm) x 1.8” (45mm) x 1.0” (25mm)
Weight .........................................................................................1.7 oz. (50g)
Warranty ...................................................................One Year (Parts & Labor)
Ethernet to Serial
Converter
Accessories
IPE-4
The IPE-4 IR Port Expander provides convenient
infrared signal expansion when used with RTI control
processors. It has one 3.5mm infrared signal input
jack and four IR emitter output ports that allow the
connection of up to four single or dual infrared emitters.
No additional power supply is required.
Part #: 10-210479-24
• Allows easy expansion of up to four emitters to a control processor
IR port.
• Compatible with most industry standard single or dual IR emitters.
• Sturdy steel construction.
• A power supply is not required for the IPE-4 to function.
• A 3’(1m) mono cable with 3.5mm mini-plugs is included for easy
connection to RTI processors.
Key Features
Specifications
Number of Output Ports ............................................................................ Four
Output Ports ................................................................................ 3.5mm jacks
........................................................ Works with industry-standard IR emitters.
IR Output Drive .....................................................100mA maximum (per port)
Infrared Input ................................................................................. 3.5mm jack
.. Compatible with RTI processors, industry-standard repeaters and receivers
Mounting .............................................................. Wall-mount or free standing
Dimensions (W x H x D) ... With tabs 5.1”(130mm) x 1.9”(48mm) x .9”(23mm)
Weight .......................................................................................6.8 oz. (192g)
Warranty ...................................................................One Year (Parts & Labor)
IR Port
Expander