Installation guide

ManualsBrandsRemote Technologies ManualsRemote ControlsT2-Cs+

CPB-1

The CPB-1 Control Port Connecting Block provides

a cost effective solution for installations such as

classrooms or boardrooms that require an in-wall

controller and both infrared and RS-232 control of local

devices. The CPB-1 provides power to one RTI in-wall

system controller and has two output ports that allow the

connection of up to two single or dual infrared emitters.

It also incorporates an RS-232 port for control of devices

without the need of an RTI processor.

Part #: 10-210195-19

• Provides power for one in-wall controller.

• RJ45 - DB9 adapter included.

• Two infrared emitter outputs.

• Variable IR output power.

• Allows RTI in-wall controllers to communicate via one-way RS-232

to devices without a processor.

• 12VDC power supply included.

Key Features

Specifications

Power Supply ...............................................................................+12VDC, 1A

Number of IR Output Ports ........................................................................ Tw o

Output Ports ................................................................................ 3.5mm jacks

........................................................ Works with industry-standard IR emitters.

IR Output Drive .................................. 100mA maximum (per port, adjustable)

Infrared Input ...... Compatible with industry-standard repeaters and receivers

RS-232 Port .......................................................................... RJ45 Connection

..........................................................................Includes RJ45 to DB9 adapter

Mounting .............................................................. Wall-mount or free standing

Dimensions (W x H x D) ............. 4.0” (102mm) x .3.5” (89mm) x 1.1” (28mm)

Weight .......................................................................................8.4 oz. (238g)

Warranty ...................................................................One Year (Parts & Labor)

Control Port

Connecting Block

Accessories

ECB-5

The ECB-5 IR Emitter Connecting Block provides

expanded infrared signal distribution when used with

RTI control processors, in-wall touch panels, third

party infrared repeater systems, etc. It has one infrared

signal input and ﬁve emitter output ports that allow the

connection of up to ﬁve single or dual infrared emitters.

Part #: 10-210076-17

• Five infrared emitter outputs.

• incorporates a sense input for monitoring the power status of a

switched outlet, current sensor, light sensor, etc.

• Variable IR output power.

• Steel construction.

• No power supply required for operation.

Key Features

Specifications

Power Supply (not included) ..................................... +9VDC to +16VDC, 1.5A

Number of Output Ports .............................................................................Five