Installation guide

39
Accessories
CM-232
The CM-232 communication module provides an RS-232
interface to almost any RS-232 enabled device. It attaches
to supported RTI control processors on one end, and a
device’s DB-9 serial port connector on the other end. The
CM-232 is capable of one-way transmission (no receive
function is supported) of user-dened character or binary
strings.
Part#: 10-210017-13
Key Features
RS-232
Communication
Module
• Connects to the output ports of the RP-6, ZRP-6, XP-3, XP-6 or
XP-8 control processors, or the PCM-8 Control Port Module.
• Offers one-way RS-232 communication with nearly any RS-232
enabled device.
• Software-selectable baud rate up to 115.2K (depending on control
system).
• Industry-standard DB-9 male connector.
• No power supply required - Power is supplied by the output ports.
• User-denable output strings using Integration Designer
®
software.
Specifications
Baud Rate ........................................................................ Software Selectable
.............................................................(Depends on attached control system)
Cable Length .......................................................................... 12 Feet (3.7 m)
Connector ....................................................................................... DB-9 Male
Pins Used ............................................................. GND, TXD, DTR (tied high)
Dimensions (W x H x D) ..................... 1.3” (33mm) x .5” (14mm) x 2” (51mm)
Warranty .................................................................. One Year (Parts & Labor)
CB-8
The CB-8 is an installation accessory designed to provide
convenient and reliable power for up to eight* RTI in-wall
system controllers. In addition to providing power, the
CB-8 combines and routes the infrared outputs from the
system controllers to a single output, for connection to
an RTI control processor.
Power .........................................................................................+16VDC, 4.3A
Maximum Current per Port ...................................................................... 1.5A
Enclosure .................................................Formed steel, black powder coating
Dimensions (H x W) .................................... 5.5 in (127mm) x 9.4 in (239mm)
Mounting .............................................................. Wall-mount or free standing
Weight ....................................................................................... 12.6oz (359g)
Warranty ...................................................................One Year (Parts & Labor)
Part #: 10-210205-11
• Includes 16VDC, 4.3 Amp power supply capable of powering up to
eight RTI in-wall system controllers.*
• Multiple CB-8 units can be daisy-chained for connecting more
in-wall system controllers.
• Standard RJ45 ports for easy connection of touchpanels.
*NOTE: A maximum of four K4 In-wall Controllers can be used
with the CB-8.
Key Features
Specifications
Connecting Block