Installation guide

ManualsBrandsRemote Technologies ManualsRemote ControlsT2-Cs+

Control Processors

XP-3

Boasting a powerful 533MHz CPU and 128MB of non-

volatile ﬂash memory, this processor packs a big punch

at a moderate price. With a built-in ZigBee

transceiver

and support for wireless bi-directional communications,

the XP-3 can provide the user with rock-solid control

and feedback from devices such as music servers,

lighting, security, and much more. The XP-3 can also be

conﬁgured to support one-way control via non-Ethernet

enabled RTI in-wall products (Ex. RK1/RKM-1/RK2) and

433MHz remote controls.* For complete control in any

room, the XP-3 even allows powerful two-way control

with Ethernet enabled RTI in-wall controllers, and full

support for the RTiPanel and Virtual Panel Apps.

The XP-3 power really becomes evident when you see

the list of features normally reserved for higher-priced

processors, such as a built-in astronomical clock,

Ethernet, and relay control and sensing. There are

also two IR output ports with routing capability and a

multi-purpose I/O port will accept an IR emitter or RTI

accessory devices for voltage sensing or one-way

RS-232.

Part #: 10-210443-15

• Supports Virtual Panel and RTiPanel Apps.

• Supports same two-way drivers used by XP6/XP8.

• Powerful 32bit, 533MHz CPU.

• 128Mb of non-volatile Flash memory stores your system conguration

even when power is not present.

• One multi-purpose I/O port supports optional RTI power sensing and

communications modules.

• Two IR output ports with variable output.

• Two assignable voltage sense inputs.

• Two programmable relay outputs.

• One two-way RS-232 port for bi-directional communication with

supported devices.

• Integrated 10/100Base-T Ethernet port for programming, control and

two-way communication with compatible devices.

• Integrated 10/100Base-T Ethernet port supports Power-over-Ethernet

(POE) Class 3.

• Built-in astronomical clock for time-based events and sleep timers.

• Built-in 2.4GHz ZigBee® RF transceiver module and removable

antenna.

• Compatible with industry standard IR emitters and blasters.

• Congurable for communication with RTI in-wall products and

433MHz wireless controllers.*

• Programmed using the RTI Integration Designer Software.

• USB 2.0 and Ethernet programming.

• Field upgradable rmware.

*NOTE: Using a 433MHz RTI remote control requires a separate RM-433

Antenna. Also, while this conﬁguration is possible, it’s use should be

limited to secondary zones that aren’t heavily used (guest rooms, outdoor

areas etc). Installations requiring primary control via both Zigbee and

433MHz controllers should use an XP-6 or XP-8 control processor.

Key Features

Specifications

Power Supply ................................................................................ +12V DC, 1A

RF Frequency Range ..............................................................2.4Ghz - 2.5Ghz

Multi-Purpose Output Port (Port 1) ........ One custom 3.5mm 4-conductor jacks

................. Designed for RTI modules as well as industry-standard IR emitters.

IR Output Ports (Ports 2 & 3) ................................................. Two, 3.5mm jacks

...................................................Compatible with industry standard IR emitters

IR Output Drive .................................... 100mA maximum (per port, adjustable)

Infrared Frequency Transmission Range ..................................15kHz - 460kHz

RS-232 Port ................................................................... One, RJ45 Connection

Ethernet Port ...................................................................... One, 10/100Base-T

Relays ................................................................... Two, 5Amps @ 30 VDC max

Sense Inputs ................................................................................Two, 3-24VDC

USB Ports ............................................................................ One, Programming

Mounting ................................................................ Wall-mount or free standing

Dimensions (W x H x D) .................7.0” (175mm) x 3.0” (76mm) x 1.0” (25mm)

Warranty .....................................................................One Year (Parts & Labor)