Installation guide

12
In-Wall System Controllers
RKM-1
The RKM-1 is a simple, intuitive keypad designed
for flush-mount installations in walls or cabinets.
Designed for multi-room audio control, the RKM-1’s
open architecture provides the flexibility to control
almost any multi-zone receiver or distributed audio
system. Sized for a single gang electrical box, the
RKM-1 incorporates eight fully-programmable hard
buttons and a customizable LED backlit film which
provides feedback of power status, selected source,
and volume level.
Part #
White: 10-210176-18
Black: 10-210180-13
• Use any standard Decora® type faceplate.
• Fits in single gang outlet box.
• Eight selectable sources.
• Backlit volume level indicator.
• Customizable LED backlit lm source indicator.
• Open architecture allows control of virtually anything.
• IR output port drives up to 1000 feet of wire.
• Completely customizable and programmable.
• Optional modules/processors for voltage sensing (to monitor power
status of equipment) and two-way control.
• USB Programming.
Key Features
Specifications
Power ............................................................ +9VDC to +16VDC, 350mA max
Backlights .............................................................. Blue LED - Eight sources
...........................................................Blue LED - Nine volume level indicators
Infrared Output Port ................................................................... 200mA output
................................................................. Drives up to 1000 ft (300 m) of wire
Operating Temperature ................................. +32°F to +122°F (0°C to +50°C)
Operating Humidity .............................................. 5% to 95% Non-condensing
Total System Memory ........................ 64K Bytes Flash (non-volatile) memory
Device Capability .............. Total number of devices is limited only by memory
Macro Capability .......................................... Unlimited steps in a single macro
...........................................Total number of macros is limited only by memory
......................................................................Macro capability on every button
Communications ..........................................................USB programming port
Enclosure ..................................................... Formed Steel, black powder coat
Front Plate .................................................... High-impact molded ABS plastic
Mounting .............................................................. Mounts into single gang box
Front Plate Dimensions (H x W) ..........Purchased separately (Decora® Type)
Dimensions (H x W x D) ...... 4.1 in (104mm) x 1.8 in (46mm) x 1.0 in (25mm)
Installation Cut-Out (H x W) .............................. 2.8 in (71mm) x 1.8in (46mm)
Total Depth in Wall ............................................... .75 in (19mm) Plus Cables
Weight .......................................................................................... 4 oz (284 g)
Warranty ...................................................................One Year (Parts & Labor)
Decora
®
is a registered trademark of Leviton Manufacturing Co. Inc.