User's Manual

T2-C Universal System Controller
16
TILT SWITCH
This button displays a window that allows you to adjust the
settings for the built-in tilt sensor. The tilt switch is a motion
detector that turns the remote on when activated.
On means the tilt switch is active and will wake-up the T2-C when
it is moved.
Off means the tilt switch is inactive.
Press the OK button when finished.
Introduction
5
§ Only use the power supply that is provided with the T2-C.
Using the wrong type of power supply may result in
damage to the battery or electronic components.
§ Do not disassemble the unit. Service of the T2-C should be
performed by authorized personnel only.
CLEANING
Occasional cleaning may be required, depending on use. It is
recommended that you create a “Clean” button somewhere on the
Home page of the T2-C. This button should link to a page that
does not contain commands or macros that could be inadvertently
executed while cleaning the unit. The “Clean” page could contain
a text message or graphic of your choosing such as:
To clean your T2-C, lightly dampen a lint-free cloth with a glass
cleaner or mild detergent, and wipe the touchscreen, keypad and
outer surfaces.