User's Manual

T2-C Universal System Controller
4
§ Both infrared (IR) and radio frequency (RF) output options.
You can even use both options on the same unit.
§ A built in motion sensor can automatically turn the unit on
when it is picked up.
§ Customizable sounds.
§ A USB port for communication with the TheaterTouch
Designer programming software.
§ Non-volatile flash memory. The T2-C will not lose any
programmed data when the battery is removed.
§ One-year parts and labor warranty
§ Available only to system integration professionals.
IMPORTANT NOTES
Please read these important notes about the T2-C:
§ The T2-C should be placed in an area where it is around
normal room temperature (between 60°F to 90°F). If the
temperature is too hot, the display appears dim. If the
temperature is too cold, the display appears dark and may
respond slowly.
§ Do not use sharp objects on the touchscreen. It is designed to
operate with a touch of your finger.
§ Do not let the T2-C get wet. It should not be handled with
wet hands or placed in an area where it could get wet.
§ Do not subject the T2-C to smoke, dust, or vibrations. The
display may be damaged from excessive shock or vibration.
Operation
17
BATTERY
This button displays a window that allows you to adjust the
relative amount of time that the low battery icon appears on the
display. This setting will determine how much time you have
between the appearance of the low battery warning and the
battery becoming completely depleted. Press the OK button when
finished.
The default warning time is Medium. Depending upon the age of
the battery and your daily usage habits, it may be beneficial to
adjust this time.