User's Manual

T4 Universal System Controller
4
§ Optional interface for RS-232 controlled equipment.
§ Interchangeable front and back bezel colors.
§ Non--volatile Flash memory stores your program even
when power is lost.
§ Easy--to-use Windows based software for programming
and customization.
§ Field upgradeable firmware.
§ USB Programming.
IMPORTANT NOTES
Please read these important notes about the T4:
§ The T4 should be placed in an area where it is around
normal room temperature (between 60°F to 90°F). If the
temperature is too hot, the display appears dim. If the
temperature is too cold, the display appears dark and may
respond slowly.
§ Avoid installing the T4 in a location where it can come in
contact with direct sunlight.
§ Do not use sharp objects on the touchscreen. It is designed to
operate with a touch of your finger.
§ Do not let the T4 get wet. It should not be handled with wet
hands or placed in an area where it could get wet.
§ Do not subject the T4 to smoke, dust, or vibrations. The
display may be damaged from excessive shock or vibration.
§ Only use the power supply that is specified for the T4 . Using
the wrong type of power supply may result in damage.
§ Do not disassemble the unit. Service of the T4 should be
performed by authorized personnel only.