User's Manual

19. SubRemote (Optional)
The SubRemote is used when the Main Remote is being recharged
SubRemote is available when the Main Remote is plugged into the Cradle, and the
Main Remote must be selected to RF mode
Buttons that are used to choose devices
The procedure of using vid1,vid2,vid3,vid4 with the Sub Remote Control is the
same as using Device link with the RH60.
ex)
Main Remote(RH60) Device link part
SubRemote Device Link
VID1 AUDIO
VID2 CABLE
VID3 DVD
VID4 DVR
20. RF Receiver & IR Converter (Optional)
Adaptor Spec : DC 9V , 400mA
Receives and changes a RF signal from the Main Remote or SubRemote to an IR signal
IR Signal Indicator. LED
When it is first turned on IR Signal Indicator LED will blink 4 times
If it does not blink 4 times, contact your distributor.
When the RF ID correctly corresponds with the RF Code, the IR Signal Indicator LED will turn
on and the IR code will be transmitted.
ack (side) Rotary Switch * The b
- RF ID Change
21