User's Manual

16. USB MODE
.Remote Control and PC Connection
Connect the Remote Control to your PC using the supplied USB Cable.
The unit will connect automatically, if the 5X Manage program is operating on your PC.
ayed.
1
<Screen1> will be displ
2. Disconnection
The remote will return to the previous screen of the Connection, if the cable is disconnected or
the PC Program is closed. In addition, the remote will restart if a Firmware Update has been
performed.
ndar will be displayed if the Remote Control is on the cradle.
No function will be available in this mode; only the Sub Remote Control will work.
id2,vid3,vid4 with the Sub Remote Control is the same as using
lly, they will be connected as shown:
17. CRADLE MODE
When the remote is connected to the cradle:
.The clock or Cale1
2.
3. The procedure of using vid1,v
Device link with the RH60.
If both Remote Controls are linked successfu
Charging Red color
Charging completed Green color
Power On Orange blink (3-time)
DIO VID1 AU
VID2 CABLE
VID3 DVD
VID4 DVR
19