User's Manual

09. IR/RF SELECT MODE
. From the Home menu press and then press
IR Output Selected
2. Select the device you wish to change and press that button. Each time
e from an antenna (RF) to a signal
(IR).
you are finished.
T
1. From the Home me
re 1>, choose between the Touch pad or Wheel.
creen3 - Wheel>
een2>, touch the area(s) instructed.
ct the sensitivity you desire (Low makes the wheel less sensitive,
ore sensitive). Note: You can test the sensitivity in this mode by turning
1
RF Output Selected
you press the button, the icon will chang
3. Press when
<Screen1>
10. CALIBRA ION MODE
nu press and then press
2. You will see <Sc en
<Screen1> <Screen2 – Touch Screen> <S
3.1 If the touch pad is selected <Scr
3.2 If the Wheel is selected, sele
High makes the wheel m
the wheel.
13