User's Manual

08. LEARNING MODE
e menu press and then press
your d sired selection ( or devices Scr
<Screen2- Button Learn> <Screen3- Devices Learn>
3. Use the wheel & device Select button(
you want to change.
Next press the button you want the RH60 to l
remote and the RH60 will learn that button. Repeat the st ns you
want to program manually. Note: .The unit will wait 5 second mitted
from the original remote. If no signal is transmitted during those 5 seconds, the unit will
d the RH60
as returned to its original state.
Hom1. From the
2. Choose e buttons een1).
<Screen1>
) to navigate to the page of the device
earn. Finally, press the button on the original
ep 2-3 for the rest of the butto
s for a signal to be trans
automatically turn off and beep a sound indication the button was not programmed an
h
ex) If you press the button in <Screen2> Next, press the (5) button on the original
Remote Control.
4. Press the button to finish and exit learning mode.
12