Specifications

- Back : General key
- Home : General key
- OK : General key
- Directional Pad : General key
- Volume : General key
- Mute : General key
- Voice : Google Assistant Search. General key
- Apper/Netflix : General key
- Channel : General key
- Guide : General key
- Numpad : General key
- KILDE : TV only
- SISTE : General key
13. TV UR Setup
- Press and hold [Boks / TV] key for 5 seconds, all the LEDs on the top and bottom are turned on and enter the TV setup mode.
- Release [Boks / TV] key, and then TV code is set up while holding down the numbers of TV brands provided
- RCU transmits the code for the brand setup (The upper LED remains ON and the lower LED blinks)
- When TV is off, release the key to set the TV (The LED blinks 3 times.)
- If user doesn't press the numeric key within 10 seconds after pressing [Boks / TV] key for 5 seconds, the Quick Setup function is ended
※ The initial Default TV code is Samsung (Because it is the most used in Norway)
Suggestions with new setup method described below ;
13-1. TV UR setup with 3 digit code
- Press and hold [Power] key & [OK] Key for 3 seconds. (FYI, 2 keys combination was suggestd to match with other setup method)
Setup mode Time
OK & Power -> TV setting 3sec
OK & Voice -> pairing start 3sec
OK & Back -> Unpairing 3sec
OK & Boks/TV -> TV Mode Lock
3sec
OK & Kilde -> Factory Default 5sec
OK & Vol -> Volume lock En/Dis
3sec
- After release keys, Then input 3 digit code from the TV brand list. Remote Solution provided TV brand list for GET RCU
- RCU transmits the code for the brand setup (The upper LED remains ON and the lower LED blinks)
- When TV is Off, press [OK] kye to complete UR setup process. Then, Lower LED blinks 3 times
- In case that there is no key input at any key press stage for 20 seconds, UR setup mode ends
13-2. TV UR setup with Auto search
- Press and hold [Power] key & [OK] Key for 3 seconds
- After release keys, then presss and hold [CH+] or [CH-] key until TV is off
-> While pressing [CH+] or CH-] key, TV UR codes are transmitted continuouslty.
- When TV is Off, press [OK] kye to complete UR setup process. Then, Lower LED blinks 3 times
- In case that there is no key input at any key press stage for 20 seconds, UR setup mode ends
13-2. TV UR setup with Group search (Top brand on numeric buttons 1 ~ 0)
- Enter Group Search Mode by pressing [OK] and [Number key] keys together for 3 secs.
OK + 1 : Samsung Group
- Press [CH+] key to send out each TV code of TV brand that users selected. OK + 2 : Sony Group
- Once TV turns off, press [OK] key to setup the right TV code OK + 3 : LG Group
OK + 4 : Philips Group
OK + 5 : Panasonic Group
OK + 6 : JVC Group
OK + 7 : Grundig Group
OK + 8 : Finlux Group
OK + 9 : Thomson Group
OK + 0 : Toshiba Group
※ The initial Default TV code is Samsung.
13. Volume Lock => This function will be added later
- Press and hold [OK] & [Vol +] keys together for 3 seconds, VOL +/-, Mute keys always operate as TV key(LED blinks 3 times)
- Press and hold [OK] & [Vol -] keys totegher for 3 seconds to release the volume lock(LED blinks times)
3