Specifications

2.35 35%
2.00 0%
1.95 0%
6. Bluetooth Connection Specifications
- If RCU and STB are disconnected for some reason after the connection is completed, RCU tries to do re-connection(Direct Advertising)
- Re-Connection (Direct Advertising) attempt is performed for about 11 seconds
- When Re-Connection (Direct Advertising) fails, RCU enters the sleep mode to reduce battery consumption
- Then, when there is a key input by user, RCU again tries for Re-Connection (Direct Advertising) for about 11 seconds
- Direct Advertising conducted by RCU for about 11 seconds during the re-connection is divided into two stages as shown below
1 step : Direct Advertising is performed every 1.6ms for 1 second (Fast)
2 step : Direct Advertising is performed every 20ms for 10 seconds (Slow)
7. Code Read Out
- Display the current TV set number on RCU with LED
- Press and hold [TV Power] and [OK] keys together for 5 seconds --- Bottom LED On (Enter set mode)
- Press [KILDE] key
- Blink in led, 100 digits, 10 digits, and 1 digit
- If it is "0", it blinks 5 times at intervals of 0.1 second, and "1 to 9" means the number of blinks at 0.3 second intervals
Example) When "023" code is set, LED operates as below
1st : Bottom LED blinks 5 times quickly
2nd : Bottom LED blinks 2 times
3rd : Bottom LED blinks 3 times
8. Couch Function (Timeout)
- When any key is pressed continuously, the code transmission of RCU stops when 30 seconds have elapsed, to reduce battery consumption
- In connected state, the release code is transmitted via RF after 30 seconds
- In unpaired or disconnected state, IR code transmission is stopped after 30 seconds
9. Factory Default
- Press and hold [OK] and [KIDLE] keys together for 5 seconds
- After 5 seconds, All LED blinks 3 times and it is initialized as factory default state.
- TV cefault codes are set for SAMSUNG and LG Batch code as factory default.
10. Boks Mode
- In default mode, it operates as STB
- During the Boks mode, the upper LED turns on with keys operation
- Pressing [Boks / TV] key turns the bottom LED turns On for 10 seconds.
Unless you have pressed another key for 10 seconds, LED is off
- Press [Boks / TV] key to enter TV mode and after 10 seconds to return to Boks mode
- If you press [Boks / TV] key while in TV mode, the upper LED turns on for 1 second(Reminds user to return to Boks mode)
11. TV Mode (During Bottom LED ON)
- When key is pressed, the bottom LED turns on
- When TV key is pressed, the bottom LED is turned off,
and when the key is released, the LED turns on again for 10 seconds before returning to the Boks mode
-> When RCU transmit IR codes, LED blinks to show that RCU transmits IR codes.
- TV Mode Lock
If user press [Boks / TV] & [OK] keys for 3 seconds, RCU blinks the bottom LED 3 times and it is set to TV Mode.
When TV key is pressed, the bottom LED turns on
Pressing [Boks / TV] key turns on the upper LED for 1 second and returns to the Boks mode
12. Key Definition
- Boks / TV: Changed STB and TV mode control. The LED operation operates as mentioned in paragraph 1, 2 above.
If user press [Boks / TV] key for 5 seconds, all the upper and bottom LEDs are ON and Quick Setup Pairing is activated.
- Power: Turn on or off STB power and TV power
Press the Power key long to transmit another code. (So
In TV mode, the Power key must support Key hold, to support Panasonic TV
- Restart : General key. STB only
- Play/Pause : General key
- Recording : General key. STB only
- Exit : General key
- Mitt innhold : General key. STB only
When RCU is changed to TV mode by pressing [Boks/TV] key and Bottom LED is on, TV keys is pressed,
LED blinks. When release key, Bottom LED is on for 10 secs.
2