Specifications

Product Approval Sheet
Confidential
3. RELIABILITY TEST
3-1 Remote Controller Assembly
3-1-1 Fundamental Performance
- Operation Current / Stand-by Current / Operating Voltage / Performance / Exterior
※ Judgement : Should meet Specification
Should be no issue no operation
3-1-2 Humidity Storage ( With battery )
- Temperature : 50± 3℃ / RH 90% ± 5%
- Time : 168 hours(If pass, extend to 336h)
※ Judgement : Should be no issue for operation
Should match current spec after test
Should be no damage or de-form on cosmetic feature
3-1-3 Thermal shock ( With battery )
- Cycle : 50 cycles
- Test Condition : -20℃ / 0.5 hour
+55℃ / 0.5 hour
※ -20℃ ~ +55℃, 30 min/cycle, ramp rate: 30C/min, dwell time: 15 min, 50 cycles. (w/ battery)
If pass, extend to 100 cycles (margin test for understand design limit)
3-1-4 Low Temperature storage
- Temperature : -30± 3℃
- Time : 48 hours
※ Judgement : Should be no issue for operation
Should match current spec after test
Should be no damage or de-form on cosmetic feature
REMOTE SOLUTION CO., LTD.
3-1-5 High temperature storage
- Temperature : 70± 3℃
- Time : 48 hours
※ Judgement : Should be no issue for operation
Should match current spec after test
Should be no damage or de-form on cosmetic feature
3-1-6 Vibration test
- Vibration width : 1.5mm
- Test Period : 10~55Hz(7.5min) → 55Hz(2Hours) → 55~10Hz(7.5min)
- Each direction(X,Y,Z)
※ Judgement : Should have no functional issue
Current should meet spec
Should be no damage or de-form
Should not be tear of PE bag, scratch on product
3-1-7 Drop test( Condition : inclued battery)
- Concrete: 1 Corner, 3 Edge, 5 Surfaces, Height : 100cm, on the Concrete floor to verify the
ultrasonic waves assembly.
※ Judgement : Should be No component tear, damage
Should be able to assemble again if case is opened re-assembled unit should be operatable
3-1-8 ESD Test
- 1) ± 4㎸,1㎐,10 Times Contact discharge
2) ± 8㎸,1㎐,10 Times Air contact discharge
※ Judgement : Should be no isse for operation
8