Operator's Manual

Chapter 9 Other features of the Tempus Pro
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 198
9.8 View installed features
Use the Main Menu option View Installed Features to view a list of features installed on Tempus Pro.
9.9 Printer maintenance
9.9.1 External printer configuration
You can use an external USB printer to print patient reports – see “9.1.2 Send patient data/report”.
To configure an external printer:
1. Select Main Menu > Printer and Headset > External Printer Settings.
2. Select the setting to change:
Printer Type - PCL3 or PCL3-GUI.
Paper - A4 or Letter (8.5 x 11“).
3. Press Test Page and check the resulting test print.
4. Press Back.
9.9.2 Internal printer configuration (optional)
You can use the internal printer (if fitted) to print:
 Waveform snapshots – see “8.2.2 Waveform viewer”.
 12 lead ECG recordings – see “6.1.6 Performing a diagnostic ECG”.
Note
Always store the Tempus Pro with a paper roll fitted to the printer.
Printing on the internal printer is not possible whilst the ultrasound is being used.
To configure the internal printer:
1. Select Main Menu > Printer and Headset > Internal Printer Settings.
2. Select the setting to change:
Paper - Plain or Grid.
Auto Print Snapshots - 'yes' means that waveform snapshots will be printed as soon as they are
captured.
3. Press Test Page and check the resulting test print.
4. Press Back.