Operator's Manual

Chapter 9 Other features of the Tempus Pro
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 196
Capnometer – pressing this brings up instructions on how to take Capnometry
measurements
Temperature – pressing this brings up instructions on how to take temperature
measurements
When in iAssist Mode, the Tempus Pro provides the user with complete instructions on how to use it. Every
step is detailed in pictures with accompanying text instructions. There are instruction processes for
everything the user will need to do to use the parameter.
The example iAssist process shown below shows there are two distinct areas on the screen that give
different types of information.
 Process Instructions - This area contains the graphical pictures and text instructions that show you how
to use the device. This takes the user through each activity one or two steps at a time.
 Touch Screen Buttons - In this example there are two buttons at the bottom of the touchscreen. In all
cases the user will press the button on the bottom right of the screen to progress onto the next step in
the process.
When in iAssist Mode, the Tempus Pro breaks all processes down into small steps. These steps are shown
on the screen in one or two at a time.
The user can see how many steps there are in any process by looking at the Process Ribbon near the top of
the screen.
In the example shown above, the screen shows that the process has 8 steps and that the device is showing
steps 6-7.
The user follows the instructions given on the screen, ensuring that they review both the image and the text.
Once they have completed both steps they proceed onto the next steps by pressing the Next touchscreen
button.
Example iAssist Process
Follow the on-
screen written
and graphical
instructions
You can go back
to the previous
step instructions
here
The strip shows
that the number
of steps in the
process and the
steps that are
being displayed
Press here when
the instructions
have been
completed