Operator's Manual

9.7 iAssist processes
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 195
9.6.6 Recording data off-line and transmitting on-line
If a connection has not been established to a Response Centre, all data for that patient can be transmitted
later so long as a new patient is not admitted. Once a new patient is admitted, the recorded data cannot be
transmitted to the Response Centre. For details on discharging the patient, see “9.3.3 Admitting a new
patient”.
9.7 iAssist processes
Note
The iAssist help processes on your Tempus Pro may differ from this example iAssist help
process in the following sections. However, the process always follows the same key
elements.
Always ensure that you read the complete iAssist help process in order and do exactly what
it requires.
The Tempus can provide additional on-screen instructions on how to use the device. This feature is called
iAssist Mode. iAssist Mode is intended to be set by more experienced users in order that they can pass the
Tempus to less experienced colleagues knowing that their operation of the device will be supported by on-
screen instructions. If iAssist is activated on the Main Menu, the second ECG Lead waveform will be
removed and the Plethysmogram and Capnogram will be moved up to make room for a row of graphical
buttons in the bottom-most waveform of the Tempus Home Screen – see “5.2.1 The main menu”.
ECG – pressing this brings up instructions on how to use the ECG
Blood pressure – pressing this brings up instructions on how to take non-invasive blood
pressure measurements
Pulse oximeter – pressing this brings up instructions on how to take blood oxygen
measurements
Home Screen in iAssist Mode
The first button
is the ECG
button
Each button is a
graphical cue to
allow the less
experienced user
to get on-screen
instructions on
how to deploy
that particular
parameter.