Operator's Manual

Chapter 9 Other features of the Tempus Pro
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 178
To edit the time or volume of a fluid before it is recorded, press and hold the fluid button. This brings up an
editor which allows any time (in the last 24 hours) to be selected and the volume to be edited.
Note
If GPS is turned on and a fix is available, drug records will be geo-tagged with the location
when the record is entered – see “9.5 GPS location”.
Note
REMEMBER the TCCC card is a paper replacement system. Like a piece of paper, all
information in the TCCC card can be edited or deleted up until the point the data is exported
onto a USB stick – see “9.1.3 Tempus to Tempus data handover”.
Switching to a previous patient will allow the user to re-access the previous TCCC card and
edit it – see “9.3.4 Switching to a previous patient”.
If the Tempus is connected to a response centre they will not be able to see the TCCC card
being edited but will be able to see a fixed update of the TCCC card on their system every 2
minutes. The response centre user is not able to edit the TCCC card, only view it – see
“9.6.5 Interacting with the Response Centre”.
Press and hold
a fluid button to
edit the time or
volume of a fluid
before it is
recorded.
Press and
release a fluid
button to record
a fluid you have
administered
with the default
time and volume.
TCCC Fluids Editor
Press this
button to enter
the time of
administration.
TCCC Fluids Time and Volume Editor
Use the
keypad to
enter the
volume.