Operator's Manual

Chapter 9 Other features of the Tempus Pro
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 174
9.2.7 Power save feature
When power save is activated the display turns to ‘min’ brightness after 3 minutes of no use (i.e. no user
controls or alarms). If there is a further 2 minutes of no use the display turns off. The Tempus Pro continues
monitoring etc. whilst the screen is off and the device’s display will come back on at its original brightness as
soon as an alarm is triggered, the touch screen is pressed or a keypad button is pressed.
This control can be used to extend the battery life of the Tempus.
9.3 Patient information
9.3.1 The patient menu
The Patient button
Pressing the Patient button launches a menu which will offer options on the management of patient data.
This menu allows you to:
Menu option Menu screen
TC3 card
– complete an electronic version of
the military Tactical Combat Casualty Care
(TCCC) card, see “9.3.2 Updating the TCCC
card”.
Patient details – enter the patient’s name, ID
and allergies, see “9.3.5 Entering patient
details”.
Discharge/admit patient – discharge the
current patient and admit a new patient, see
“9.3.3 Admitting a new patient”.
Switch to a previous patient – switch to a
previously monitored patient, see “9.3.4
Switching to a previous patient”.
Medics - enter details of medics (first
responders).
End of shift – allows you to clear the patient
list. This means that you will not have access
to previous patient incidents.
Note: The TC3 card option is only available on
Tempus units sold to military users.