Operator's Manual

Chapter 9 Other features of the Tempus Pro
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 172
 After this change, the home screen looks like this:
Note
You can swap two waveforms around by selecting both waveform regions.
The waveform selection feature is not available when iAssist Mode is activated
9.2.5 Brightness control
The Display Menu includes a screen brightness control. The screen’s brightness has five available settings
as follows:
 Min – 10%;
 Low – 30%;
 Mid (default) – 60%;
 High – 80%;
 Max – 100%.
Using a lower brightness setting will improve battery life.
WARNING
The low display settings are intended for use by military and civilian pre
-
hospital care
users for scenarios where low emitted light is required or desired. Users are
reminded that while these functions are enabled, the device will present a display that
may be too dim to see in daylight conditions. Users should therefore ensure that
they use this feature only when required and recognise that greater levels of patient
care and supervision will be required.
Note
Min, Low and Mid are compatible with NVGs (night vision goggles) – see “4.3.2 Tactical
mode (optional)”.
The Max setting should only be used for strong sunlight applications.
Home Screen with Plethysmogram in Waveform 3
Waveform 3
now displays
the
plethysmogram
and SpO2 data
This numeric
area now
displays
pressure P2
data