Operator's Manual

Chapter 9 Other features of the Tempus Pro
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 170
9.2.4 Waveform and lead selection
Use the Waveform / Lead Selection screen to customise the display of waveforms in the four-waveform
home screen. To access this screen, either press the Display button and then press Waveform / Lead
Selection, or from the ECG Settings menu press Waveform / Lead selection.
Note
If Corsium Crew is enabled, the Waveform / Lead Selection screen will include 'Crew App'
waveforms. See the Corsium Crew User Guide.
High Contrast Display Activated
Waveform Selection
Press the
waveform
region that
you want to
update
(the first is
reserved for
ECG)
Press the ECG
lead that you
wish to display in
the selected
waveform region
(ECG cable
dependent)
Press to display
plethysmogram
or capnogram in
the selected
waveform
region
Press the IP
sensor that you
wish to display in
the selected
waveform region
(P1 to P4 as
available)
Press to
display AA gas
vitals (optional)