Operator's Manual

Chapter 6 Taking medical readings
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 98
CAUTION
If the low perfusion indication is frequently displayed, find a better-perfused monitoring site.
In the interim assess the patient and if indicated verify oxygenation status through other
means.
6.3.5 Pulse oximetry probes
The following pulse oximetry sensors may be used with the Tempus Pro: standard, SpCO or SpHb. Each
sensor shows a different range of parameters. There is no single sensor that shows all parameters.
The standard adult SpO2 reusable sensor reads SpO2, PI and PVI
The Standard adult SpO2 section
The SpCO sensor reads SpCO, SpMet, SpO2, PI and PVI
The Pulse Oximetry section with SpCO
The SpHb sensor reads SbHb, SpMet, SpOC, SpO2, PI and PVI
The Pulse Oximetry section with SpHb
Note
Depending on which sensor is used the Tempus will display only the available parameters.