Operator's Manual

Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 9
1 Introduction
This manual is for the Tempus Pro patient monitor.
All Tempus Pro monitors have a standard configuration that provides ECG monitoring, NIBP, pulse oximetry
(SpO
2
) and impedance respiration. Additional functions are available depending on Tempus Pro part
number:
 00-1004-R: standard configuration with invasive pressure (2 channels), ETCO
2
and contact temperature
(1 or 2 channels).
 00-1007-R: standard configuration with invasive pressure (2 channels), ETCO
2
, contact temperature (1
or 2 channels) and Bluetooth headset.
 00-1024-R: standard configuration with printer, ETCO
2
and contact temperature (1 or 2 channels).
 00-1026-R: standard configuration with printer, invasive pressure (2 channels), ETCO
2
and contact
temperature (1 or 2 channels).
For a full list of Tempus Pro features, see “1.6 Features list”.
Note
Tempus Pro pulse oximetry provides the standard SpO
2
, pulse rate and perfusion index (PI)
measurements but also has the capability to monitor carboxyhaemoglobin saturation
(SpCO), methaemoglobin saturation (SpMet), total haemoglobin concentration (SpHb), total
oxygen content (SpOC) and pleth variability index (PVI).
The Tempus Pro is supplied in different configurations depending on the customer’s requirements. This
manual is written to cover all Tempus Pro features and therefore details regarding optional features will not
be applicable to all units.