Operator's Manual

5.2 Menus
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 53
5.2.2 Printer and Headset menu
The current unit configuration can be viewed by accessing the Configuration screen from the Printer and
Headset menu – see “5.2.1 The main menu”.
The Printer and Headset menu allows access to settings and controls that the user may occasionally need
to access. Note that the primary communication settings are designed only to be controlled by maintenance
staff so these settings are only available behind the maintenance menu function in the main menu.
The menu allows access to the following functions:
Menu option Menu screen
Pairing Bluetooth – provides step-by-step
instructions on pairing the device.
Headset Settings – update the headset’s
noise filter setting (applicable only to the
Bluetooth headset) and change the default
headset between wired and wireless.
External Printer Settings – choose the
default printer paper - either US Letter (8.5 x
11“) or A4 - and switch between PCL3 &
PCL3-GUI printer types.
Internal Printer Settings – only available if
the Tempus Pro is fitted with a printer.
Change internal printer settings, for example
paper type (plain or grid) and auto print
snapshots (on or off). See “9.9 Printer
maintenance”.
5.2.3 Power and clock settings
Using this menu, you can set the power save mode and the screen brightness level. For details relating to
the brightness setting, see “9.2.5 Brightness control”.
This menu is accessed using the Power and Clock Settings button on the Main Menu – see “5.2.1 The
main menu”.
Menu option Menu screen
Power save mode – turn power saving on or
off.
Brightness – select the screen brightness
level.
Note: The current time and date are also
displayed.