Operator's Manual

Chapter 5 Using the Tempus Pro
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 52
Menu option Menu screen
Communication Modes
– configure the
modes, see “9.6.4 Communications modes”.
Wireless Enabled – disable or enable all
wireless communications. If any of these
features are not enabled (either not
purchased or disabled in the device’s
maintenance settings) then they will be
greyed out.
Connect – performs the same function as the
membrane button, see “9.6 Connecting to an
alternate location”.
Manage Wi-Fi Networks – provides access
to the Manage Wi-Fi Networks menu. GPS
Location – obtain a fix on the device’s
location (using the built-in GPS module), see
“9.5 GPS location”.
Power and Clock Settings
– provides
access to screen brightness, time, date and
power saving settings, see “5.2.3 Power and
clock settings”.
Maintenance and Settings – open the
Maintenance and Setting Menu. This allows
unit name and mode network settings to be
modified, see the Tempus Pro Maintenance
Manual (available from RDT).
Demonstration and Training – review and
update the demonstration settings, see “13.1
Demonstration and training”.
About Tempus Pro – view device
identification data and a list of features
installed on Tempus Pro, see “9.8 View
installed features”.
Printer and Headset – open the settings for
the communications interfaces of the product,
see “5.2.2 Printer and Headset menu”.