Operator's Manual

Chapter 5 Using the Tempus Pro
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 44
When the device is started it will present as follows:
Pressing any of the parameter areas will access the controls and settings menu for that parameter. For
example, if the ECG area is touched, the following menu will be shown:
ECG Settings Menu 1 of 2
The Home Screen at Start up
No patient
sensors have
been connected
yet so this is
indicated for
each parameter
Vital signs
readings are
displayed in
these areas
alongside alarm
limits (if
applicable)
Each parameter
area is a button
which can be
pressed to
access the
settings for that
parameter
4 parameter
channels are
provided. These
are labelled and
colour coded to
the patient
connectors on
the side
The current
measurement is
always shown
here
The parameter
alarms can be
turned off and on
here
All alarm settings
can be accessed
here
Press here to
return to the
results screen
Graphical and
tabular trends
can be accessed
here
Real-time vital
signs are
shown across
the bottom