Operator's Manual

Chapter 4 Setting up
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 42
To switch it on or off:
1. Press the Main Menu button .
2. Slide the iAssist switch to On or Off. When switched on, iAssist buttons appear at the bottom of the
home screen.
4.3.5 Switching off
Before switching the Tempus Pro off, you should make sure that it is not in use.
To power off quickly with no countdown or confirmation:
1. Ensure the Tempus Pro is not in use.
2. Press and hold the button for 2 seconds.
To power off with countdown and confirmation:
1. Ensure the Tempus Pro is not in use.
2. Press and release the button. The LED on the on/off button will start flashing.
3. The Tempus Pro displays a 10 second countdown timer.
Press the Confirm Power Off button.
Note
Before removing the battery, you must switch off the Tempus Pro by pressing the power
button. Do not remove the battery when the Tempus is on (unless there is a power supply
attached to the device).
Note
If necessary, you can force a hard shut-down by pressing and holding the power button for
10 seconds.
Note
Remember that the battery cannot be removed until the lamp on the front panel has gone
out.
Power Off Dialog
The dialog
shows a 10
second
countdown
before power off
is aborted.
To confirm
power off, press
here within 10
seconds.