Operator's Manual

Table of Contents
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 4
4 Setting up 37
4.1 Before deployment 37
4.2 Unpacking the Tempus Pro 38
4.3 Starting and stopping the Tempus Pro and selecting a patient 39
4.3.1 Switching on 39
4.3.2 Tactical mode (optional) 39
4.3.3 Setting the patient 41
4.3.4 Starting and stopping iAssist 41
4.3.5 Switching off 42
5 Using the Tempus Pro 43
5.1 Controlling the Tempus Pro 43
5.1.1 The touchscreen 43
5.1.2 Membrane buttons and LED indicators 45
5.1.3 Status bar 46
5.1.4 Status bar for communications 48
5.1.5 Instrument readings 49
5.2 Menus 50
5.2.1 The main menu 50
5.2.2 Printer and Headset menu 53
5.2.3 Power and clock settings 53
6 Taking medical readings 55
6.1 Electrocardiography (ECG) 55
6.1.1 Getting started 57
6.1.2 Monitoring ECG with a 3-lead cable 58
6.1.3 Monitoring ECG with a 4-lead cable 59
6.1.4 Monitoring ECG with a 5-lead cable 60
6.1.5 Monitoring ECG with a 12-lead cable 61
6.1.6 Performing a diagnostic ECG 63
6.1.7 ECG specifications 66
6.1.8 ECG settings 68
6.1.9 Detecting arrhythmias during ECG monitoring 70
6.1.10 Measuring ST elevation and QT interval (optional) 72
6.1.11 Monitoring respiration rate with ECG cable 74
6.1.12 Monitoring heart/pulse rate with no leads 77
6.2 Non-invasive blood pressure (NIBP) 78
6.2.1 Getting started 81
6.2.2 Taking readings 81
6.2.3 NIBP settings 83
6.3 Pulse oximetry 85
6.3.1 Getting started 95
6.3.2 Pleth variability index 95
6.3.3 Taking readings 96
6.3.4 Features 97
6.3.5 Pulse oximetry probes 98
6.3.6 Pulse oximeter settings 99
6.3.7 SpHb settings 102
6.4 Capnography 103
6.4.1 Getting started 105
6.4.2 Taking readings 106
6.4.3 Capnometer settings 107
6.5 Contact temperature 109
6.5.1 Getting started 109
6.5.2 Taking readings 109
6.5.3 Contact temperature settings 110