Operator's Manual

3.2 Key features of the unit
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 27
3.2.3 Tempus Pro rear
Non-printer models
If the Tempus Pro is not fitted with an internal printer (part number 00-1004-R or 00-1007-R):
 The rear houses the RapidPak clip (discussed above).
 Also on the rear is the aperture for the camera and backlight.
 The clip carries a general product label for regulatory purposes and also two labels which help guide
the user to repack the SpO
2
sensor and the ECG cable.
If the Tempus Pro is a non-printer model with Bluetooth headset (part number 00-1007-R):
 The Bluetooth headset is docked onto a connector which enables the Tempus Pro to top its charge
up automatically on a regular basis, thus ensuring the headset is always ready to use.
 The Bluetooth headset is a Sennheiser Presence or Sennheiser VMX200.
BP cuff
SpO
2
sensor
Rear alarm
light
Camera and
backlight
Heatsink
3 or 5 wire
ECG Cable
The Rear of the Tempus Pro (non-printer model)