Operator's Manual

Chapter 7 Alarms
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 144
To clear technical alarms, use one of the following methods:
 Either: press the “Clear this message” button on the Alarm Description Dialog screen;
 Or: correct the error that caused the alarm to be raised, for example refit a patient sensor that has been
disconnected.
7.8 Tactical mode warning
If the Tempus is set to Tactical (Silent) Mode, then all audible alarms will be ceased (visual alarm indications
will remain) – see “4.3.2 Tactical mode (optional)”.
Setting Tactical Mode to ON will give the following warning:
Clearing a technical alarm
A title and
detailed
description will
be shown in the
centre of the
dialog box.
Press here to
acknowledge the
message and
clear the alarm
state
Tactical Mode Warning
Once Tactical
Mode is set, this
will be
permanently
displayed in the
alarm status bar.