Operator's Manual

7.2 Visual alarm characteristics
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 127
When there is no alarm state, the alarm bar will display the time of the last patient alarm or “No Alarms
Active” if there have not been any alarms.
7.2.3 Alarm limits bar
For patient alarms only, on the Home screen, the Tempus highlights the alarm limits bar for the parameter
that is alarming. It is highlighted in a solid (not flashing) yellow.
Alarm Status Area – Technical Alarm
Active technical
alarms look like
this
Alarm Status Area with no alarms active
This shows that
no alarms are
active