Operator's Manual

Chapter 7 Alarms
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 126
7.2.1 Alarm bar LEDs
The alarm bar LEDs illuminate in one of the following ways:
 Flashing yellow LED (for patient alarms);
 Solid yellow (for technical alarm);
 Flashing red (for specific high priority alarms).
CAUTION
The alarm bar can also be user-configured to show a solid green LED to indicate no active
alarms (this feature is enabled and disabled in the Maintenance Menu, refer to the Tempus
Pro Maintenance Manual for details).
7.2.2 Alarm status area
For both patient and technical alarms, the Tempus shows the alarm symbol and a description of the alarm in
the alarm status area at the top right of the display.
CAUTION
In strong daylight users should ensure that the alarm status area is visible.
Note
If multiple alarms occur, they will be displayed in rotation in the alarm status area.
Press the alarm status area to view a list of all active alarms and to select technical alarms for clearing – see
“7.7 Viewing and clearing alarms”.
Alarm Status Area – Patient Alarm
Active patient
alarms look like
this