Operator's Manual

Chapter 6 Taking medical readings
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 114
Once a second channel of invasive pressure is in use, it will appear as shown below.
Note
If a second channel of invasive pressure is used, this channel will replace the pulse
oximeter’s results and plethysmogram in the results layout. The pulse oximeter results will
move to the right into the previously unoccupied area. As soon as the either of the invasive
pressure channels stop being used (when the transducer is disconnected from the adaptor
cable and the alarm ceased), the pulse oximeter results and plethysmogram will return to
their original location.
The second
channel will
appear here
Monitoring two channels of invasive pressure
Note that the
pulse oximetry
readings move to
here
The channel
label is shown
here
The Systolic,
Diastolic and
Mean
measurements
are shown here
The pressure
waveform is
shown here