Operator's Manual

1.6 Features list
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 11
1.4 Use of this manual
The instructions and safety precautions provided in this manual must be observed during all phases of the
operation, usage, service or repair of the Tempus or its accessories. Failure to comply with the information
contained in this manual e.g. warnings, precautions, instructions etc. will violate the safety standards of
design, manufacture and intended use of the products. Remote Diagnostic Technologies Ltd. assumes no
liability for customer failure to comply with the information contained in this manual.
WARNING
The Tempus is intended to be operated by clinically qualified personnel only. This
manual, as well as accessory directions for use and all precautionary information and
specifications should be read before use.
CAUTION
Separate manuals are provided for the setup and maintenance of the device. These
manuals are intended for the communications engineers and Bio-medical engineers
responsible for such activities and are available from RDT upon request.
Please check RDT’s website regularly for new versions of this manual: https://www.rdtltd.com/support-and-
resource-centre/.
To access the manual, you will need to enter the following details:
Username
TEMPUSPROnnnn
“nnnn” is the last four digits of your Tempus Pro serial number.
Password
w265nnnn
1.5 Intended users
RDT assumes that users of the product are clinically trained in how to take and interpret a patient’s vital
signs.
The Tempus Pro and this manual are intended to be used by such clinically-trained personnel. While the
Tempus Pro has been designed as a good quality monitor; RDT reminds users that no monitor can replace
good clinical judgment or the care and attention of a clinician. Before attempting to work with this
equipment, the user must read, understand note and strictly observer all warnings, cautions and safety
markings in this manual, other associated labelling and on the equipment.
It is the user’s responsibility to ensure they are properly prepared to use the product. No formal training
should be required so long as the user reads this manual thoroughly and familiarises themselves with the
product before use. RDT can provide direct training courses if preferred.
1.6 Features list
All Tempus Pro monitors come with the following items:
 Lithium-ion battery
 Non-invasive blood pressure hose
 Non-invasive blood pressure cuff
 Masimo patient cable
 Tempus Pro ECG cable
 Tempus mains power supply and mains cable
 Tempus Pro user manual set (CD-ROM)
The following additional items may be included:
 Configurations with a built in capnometer (optional) are provided with an Oridion Military and Air
Medical Sample Pack.
Configurations can include an optional 2 Channel Invasive Pressure Module (part number 01-2017).