Operator's Manual

Chapter 6 Taking medical readings
Tempus Pro User/Operator Manual - 41-2001EN-00 – Page 102
6.3.7 SpHb settings
Pressing the SpHb settings button (if activated) brings up the SpHb settings page:
Menu option Menu screen
SpHb limits (g/dL) – set the upper and lower
alarm limits for SpHb.
SpHb mode – select Arterial or Venous.
SpHb averaging – select Short, Medium or
Long.
Sensor life remaining – shows the remaining
life of the pulse ox sensor.
Sensor life remaining
‘Sensor life remaining’ shows the life of the sensor. A tech alarm will sound to warn when the remaining life
is low. If the patient is still being monitored when the sensor life reaches zero, it will continue to monitor the
patient but must be changed once monitoring has finished. A further tech alarm will sound once monitoring
of patient has finished.
Note
If monitoring is complete, remember to disconnect the sensor from the patient cable as this
may impact the life expectancy of the sensor.