Specifications

SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to :
• be qualified
• follow the instructions of this manual
• CAUTION ! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires !
• This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
• IMPORTANT: Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems.
• Keep away from heaters and other heating sources !
• If the device has been exposed to drastic temperature fluctuation (e. g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
• Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the
power-cord from time to time.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
• shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an
extent that their effectiveness is impaired, for example by cracks or deep scratches.
• Never let the power-cord come into contact with other cables ! Handle the power-cord and all connections
with the mains with particular caution !
• Make sure that the available voltage is not higher than stated in this manual.
• Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
2 7
USER INSTRUCTION - COLORBEAM 7 FC IR