SDS

Whiteboard renew
Safety Data Sheet
Prepared according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
03/14/2018
Whiteboard renew
2/5
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media
:
Use extinguishing media appropriate for surrounding fire.
5.2. Special hazards arising from the substance or mixture
Fire hazard
:
Not flammable.
Explosion hazard
:
Product is not explosive.
Reactivity
:
No dangerous reactions known under normal conditions of use.
5.3. Advice for firefighters
Firefighting instructions
:
Use cold water spray to cool fire-exposed containers to minimize risk of rupture. Exercise
caution when fighting any chemical fire. Do not dispose of fire-fighting water in the environment.
Prevent human exposure to fire, fumes, smoke and products of combustion.
Protection during firefighting
:
Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures
:
Handle in accordance with good industrial hygiene and safety procedures.
6.1.1. For non-emergency personnel
Protective equipment
:
Wear Protective equipment as described in Section 8.
Emergency procedures
:
Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment
:
Wear suitable protective clothing, gloves and eye or face protection. For further information
refer to section 8: "Exposure controls/personal protection".
6.2. Environmental precautions
Prevent entry to sewers and public waters. Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
For containment
:
Soak up small spill with inert solids. Contain any spills with dikes or absorbents to prevent
migration and entry into sewers or streams.
Methods for cleaning up
:
Soak up with absorbent material, and place in non-leaking containers for proper disposal. Place
in a suitable container for disposal in accordance with the waste regulations (see Section 13).
6.4. Reference to other sections
See Sections 8 and 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:
Do not handle until all safety precautions have been read and understood. Avoid contact with
skin and eyes. Wash hands and other exposed areas with mild soap and water before eating,
drinking or smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:
Store in a well-ventilated place. Keep cool. Keep container tightly closed.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No data available
8.2. Exposure controls
Appropriate engineering controls
:
Provide adequate general and local exhaust ventilation. Use process enclosures, local exhaust
ventilation, or other engineering controls to control airborne levels below recommended
exposure limits. Use explosion-proof equipment with flammable materials. Ensure adequate
ventilation, especially in confined areas.
Personal protective equipment
:
Gloves. Protective goggles.
Hand protection
:
Use gloves chemically resistant to this material when prolonged or repeated contact could
occur. Suitable gloves for this specific application can be recommended by the glove supplier.
Eye protection
:
Use eye protection suitable to the environment. Avoid direct contact with eyes.
Skin and body protection
:
Wear long sleeves, and chemically impervious PPE/coveralls to minimize bodily exposure.