Quick Start Guide
WHAT’S IN THE BOX DOORCAM D BATTERIES BATTERY COVER SCREW HEX WRENCH MOUNTING SCREWS (optional)
MEET DOORCAM CAMERA* 1 IR LED 2 PIR sensor 3 Camera lens 4 Speaker 5 ALS sensor 6 Mic BODY 7 Battery cover screw 8 Bracket adjustment screw 9 Mounting Hole** 10 Status button 11 Status LED 12 Battery cover *Remove the scratch protection sticker before use **Optional for mounting
HOW TO REGISTER DOORCAM CREATE AN ACCOUNT 1. Make sure your mobile device is connected to your home Wi-Fi. 2. Download and launch the app. 3. Press sign up at the bottom of the login page. 4. Enter your email and create a password and profile name. Then press sign up. For Help, press the at the top right corner.
REGISTER DOORCAM 1. Have your Wi-Fi network password available. 2. Insert 3 D batteries into the battery slots. 3. DoorCam's status LED light should flash up and down. If it is not, press the status button. 4. Go back to the app, and select your timezone. 5. Switch to your phone’s Wi-Fi settings, leaving app open. Please DO NOT CLOSE THE APP. 6. Connect to the network DoorCam_xxxxxx. If you see "internet is unavailable," tap "okay." 7.
HOW TO ADJUST DOORCAM 1. Use the wrench to loosen the bracket. 2. Hold the body with one hand and pull the camera outwards with the other. 3. Hang DoorCam over your door and push the camera inwards until it fits. 4. Use the hex wrench to tighten the bracket. WARNING: This product may fall off if placed too close to the edge of the door and not mounted. We recommend placing at the center of the door and securing the device using the included mounting screws. DO NOT touch the metal part of the bracket.
HOW TO REPLACE BATTERIES 1. Remove the battery cover screw using a screwdriver. 2. Remove the battery cover. 3. Replace batteries and secure the battery cover using a screwdriver.
FAQ Forgot your password? 1. Press “forgot password” on the login page. 2. Enter your account email and click SEND. 3. Check your email (including spam folder) for the temporary password. 4. Open the app and log in using your account email and the temporary password. 5. Create a new password. How many users can access the DoorCam? You can view DoorCam from up to 5 iOS/Android devices: 1. Open the app from your choice of device. 2. Log in using the same account email and password. 3.
TROUBLESHOOTING Can’t see the videos on your Recent Activity? For Android users, allow all permissions to the app: Settings > Applications Manager > Permissions > Storage remo+ Check your Settings: Motion Sensor app > Menu > Save Videos to Cloud Devices > Your Devices > Turn on Motion Sensor > Turn on Save Videos to Cloud > Press the DoorCam status button to save the settings Can’t find your home Wi-Fi during the setup process? If you cannot get past step 7 on "Register DoorCam" on the QSG, make sure you
SUPPORT We’re happy to help! support@olivendove.com (888)-985-1849 Mon-Fri 8am to 5pm PT (except holidays) LIMITED WARRANTY 1. LISCENSOR DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE LICENSED PRODUCT AND HARDWARE WILL MEET LICENSEE’S REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE AND HARDWARE WILL BE UNINTERRUPTED OR ERROR-FREE.
HOW TO DISPOSE YOUR BATTERIES Alkaline batteries are not listed as a hazardous waste under the Resource Conservation and Recovery Act (RCRA). Most states classify alkaline batteries according to RCRA regulations. however, some states have more rigorous regulations. The hazardous waste characterization requirements of Alaska, California, Minnesota, Rhode Island and Washington include bioassay. South Carolina regulates all types of batteries as special waste.
