Operation Manual

4
C GETTING STARTED
For best shaving performance, it is recommended that you use your new shaver daily for
up to four weeks to allow time for your beard and skin to become accustomed to the new
shaving system.
, CHARGING STAND
• Rotateopenthechargestandfullytostandrmlyonaatsurfacewhilecharging.For
travel you can fold the stand around the shaver (see below).
, CHARGING YOUR SHAVER
• Ensuretheapplianceisturnedo.
• Connectthechargingstandtotheadaptorandthentothemains.
• Placetheshaverinthechargingstand.
• Chargeforatleast24hourswhenusingforthersttime.
• Allow4hoursforafullcharge.Thechargingindicatorlightwillindicatewhenthe
shaver is fully charged.
,
Whenchargeislow,thetopLEDwillilluminateasolidredlight.Whenchargingthe
bottomLEDwillilluminateasolidgreenlight.WhenfullychargedbothLED’swillbeo.
• Topreservethelifeofyourbatteries,letthemrunoutevery6monthsthenrechargefor
24 hours.
• Theshaverautomaticallyadjuststoamainsvoltagebetween100Vand240V.
O This appliance should be charged by approved safety isolating adaptors PA-0510K
with the output capacity of 5.0V dc; 1.0A.