Operation Manual

E Tips for best results

• Always hold the shaver at right angles to the skin so that all three foils are

 touchingtheskinwithequalpressure.

• Use moderate to slow stroking movements. The use of short linear motions

in stubborn areas may obtain a closer shave, especially along the neck and

chin line.

, DO NOT press hard against the skin in order to avoid irritation and damage

to the foil heads.

, Note: your shaver has been designed to be used in the shower if

desired.

C CARE FOR YOUR SHAVER

• Care for your appliance to ensure a long lasting performance.

• We recommend you clean your product after each use.

• The easiest and most hygienic way to clean the appliance is by rinsing the

appliance head after use with warm water.

• Keep the switch in the “o” position when not in use.

, CLEANING CAUTIONS

• Ensure the shaver is switched o and unplugged from the power source.

• Remove the foil assembly by pressing the release buttons on either side of

the head and lifting the foil assembly upwards to remove from the hair

pocket.

• Tap out the excess hair shavings and rinse the foils under running water.

• Do not clean the shaving foil with a brush.

• Replace the head assembly by placing the assembly on top of the hair

pocket, press down and click into place.

, CLEANING TRIMMER

• Lubricate the teeth of the trimmer every six months with a drop of sewing

machine oil.

, REPLACING THE FOILS & CUTTERS

• Toensurecontinuedhighqualityperformancefromyourshaver,we

recommend the foils and cutters are replaced every six months.

, Signs that your foils and cutters need replacing.

• Irritation: as foils get worn, you may experience excessive skin irritation.

• Pulling: as the cutters wear, your shave may not feel as close and you may

feel the cutter pulling your hair.

• Wear through: you may notice that the cutters have worn through the foils.