Operating Guide

Product Identication

SAFETY PILOT

This heater has a pilot with an Oxygen Depletion Sensing (ODS) safety shuto system. The ODS/pilot shuts

o the heater if there is not enough fresh air and cuts o the main burner gas in the event of ame out.

THERMOSTAT HEAT CONTROL

The control automatically cycles the burner on and o to maintain a desired room temperature (see page

21). When used as a vented decorative appliance, use of the thermostat function is prohibited. Operate

manually only.

LEG KIT (Select models)

Two (2) support legs and four (4) support leg screws are included for oor mounting the heater. See page 14.

NOTE: This is an optional accessory and is not required for operation of the heater.

FAN KIT (Select models)

The fan kit helps to distribute the warmed air into the space more rapidly.

NOTE: This is an optional accessory and is not required for operation of the heater.

Models:

REM-B300LT-F / REM-B200LT-F / REM-B100LT-F /

REM-B300NT-F / REM-B200NT-F / REM-B100NT-F

Models:

REM-R280LT-F / REM-R300NT-F /

REM-R150LM-F / REM-R180NM-F