Operation Manual

5
• Toretractthetrimmer,pushthetoprearofthetrimmerdownuntilitlocks
under the trimmer release button.
E Tips for best results
• Ensureyourskinisdry.
• Always hold the shaver at right angles to the skin so that all the heads are
touching the skin with equal pressure.
• Usemoderatetoslowstrokingmovements.Theuseofshortcircularmotions
in stubborn areas may obtain a closer shave, especially along the neck and
chin line.
• DONOTpresshardagainsttheskininordertoavoidirritationanddamage
to the foil heads.
C CLEANING AND MAINTENANCE
• To ensure long lasting performance clean after each use.
• Ensure the appliance is switched o and unplugged from the mains.
• The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head after use with warm water.
, CLEANING
• Open the shaver head by pressing the release button on the front of the
shaver and ipping open the head.
• Turn the cutter assembly dial anticlockwise and lift upwards to gain access
to the three cutters.
• Remove the inner cutters.
• Rinse or brush clean the inside of the rotary heads.
• Brush or rinse out remaining debris.
• Replace the inner cutters. Place the cutter assembly over the three cutters
and turn the dial clockwise to lock into place.
• Close shaver head until it snaps closed.
• Lubricate the teeth of the trimmer every six weeks with a drop of sewing
machine oil.
• Shave head replacement model: SPSFD2
BATTERY REMOVAL
• Thebatterymustberemovedfromtheappliancebeforeitisscrapped.
• Theappliancemustbedisconnectedfromthesupplymainswhenremoving
the battery.