Instructions for use

C GETTING STARTED

, CHARGING YOUR APPLIANCE

• Before using your groomer for the rst time, charge for 14-16 hours.

• Ensure the product is switched o.

• Place your groomer into the stand, connect the adaptor to the product and

then to the mains.

• The charging indicator will illuminate.

• The charging indicator will turn o once fully charged.

• Allow 16 hours for a complete charge.

• To preserve the life of your batteries, let them run out every 6 months then

recharge for 14-16 hours.

, USB

• Connect your USB cable to the USB port on your power source.

• Connect the USB cable to your appliance.

• The appliance can only be used in corded mode while plugged into a

standard electrical socket.

, Caution: do not turn your trimmer on while charging through a USB port on

your computer.

F INSTRUCTIONS FOR USE

, ATTACHING AND REMOVING GUIDE COMBS

, To Attach

• With the trimmer blade facing away from you, slide the guide comb on top

of the trimmer blade and click into position.

, To Remove

• With the trimmer blade facing away from you, carefully push the guide

comb away from the wide head trimmer.

, BEFORE YOU BEGIN

• Comb facial hair with a ne comb before you start trimming.

• Hairs should be dry and without any waxes or lotions before using the

groomer.

, To thin and taper the beard/moustache

• Attach the trimmer blade.

ENGLISH