Instructions for use

2
ENGLISH
090054_HC240C_UK.indd 2090054_HC240C_UK.indd 2 01.02.2009 21:02:19 Uhr01.02.2009 21:02:19 Uhr
NOTE: The product can only be used in corded mode while plugged into the standard electrical socket.
CORDED USE
Connect your USB cable to the USB port on the power adaptor and then
plug the adaptor into the electrical socket.
Connect the USB cable to your beard trimmer.
CAUTION: Extended mains only use will result in the reduction of the battery life.
HOW TO USE
BEFORE YOU BEGIN
Always comb your beard or moustache with a fine comb before you start trimming.
Adjusting the Trim Length
The trimmer comb can be adjusted to give you 9 different trim lengths simply by turning the
zoom wheel to the desired setting. Turn the zoom wheel clockwise for shorter length, anti-
clockwise for longer length. The wheel will click into place as it reaches each setting, and the
setting number will appear on the length position indicator.
SETTING HAIR DESCRIPTION HAIR LENGTH
1 Stubble or cropped look 1,5 mm 0.06”
22,5 mm0.1”
3 Short 4 mm 0.16”
45,5 mm0.22”
5Medium 7 mm0.28”
69 mm0.35”
7 11 mm 0.43”
8 14 mm 0.55”
9 Long 18 mm 0.71”
Note Trimmer comb must be attached to the groomer in order to use the hair length
selector.
Your beard trimmer cannot be overcharged. However, if the product is not going to be used
for an extended period time (2-3 months), unplug it from the mains and store. Fully recharge
your beard trimmer when you would like to use it again.
CAUTION: Do not turn your beard trimmer on while charging through a USB port on your computer.