Instructions for use

54
C GETTING STARTED
, CHARGING YOUR HAIRCLIPPER
• Beforeusingyourhairclipperforthersttime,chargefor16-20hours.
• Ensuretheproductisswitchedo.
• Connectthechargingadaptortotheproductandthentothemains.
• Iftheproductisnotgoingtobeusedforanextendedperiodtime(2–3months), 
unplug it from the mains and store.
• Fullyrechargeyourproductwhenyouwouldliketouseitagain.
• Allow 16 hours for a full charge on the HC5400 and 4.5 hours on the HC5600 and HC5800.
• Topreservethelifeofyourbatteries,letthemrunoutevery6monthsthenrechargefor
16-20 hours.
O This appliance should be charged by approved safety isolating adaptors PA-3215E (for
HC5400 EU version) or PA-3215U (for HC5400 UK version) with the output capacity of
3.2V dc; 1500mA; and should be charged by approved safety isolating adaptors
PA-4515E (for HC5600,HC5800 EU version) or PA-4515U (for HC5600,HC5800 UK version)
with the output capacity of 4.5V dc; 1500mA .
, QUICK CHARGE (HC5600 & HC5800)
Quick charge time 10 minutes 30 minutes 1 hour 2 hours
Run time 5 minutes 15 minutes 30 minutes 40 minutes
, CHARGING VIA CHARGING STAND (HC5800)
• Ensuretheproductisswitchedo.
• Connectthechargingadaptortothechargingstandandthentothemains.
• Allow4.5hoursforafullcharge.
, CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensuretheproductisswitchedo.
• Connectthechargingadaptortotheproductandthentothemains.
•
Allow 16 hours for a full charge on the HC5400 and 4.5 hours on the HC5600 and HC5800 .
, USB
• ConnectyourUSBcabletotheUSBportonyourpowersource.
• ConnecttheUSBcabletoyourappliance.
Note: charging may take longer when charging via USB.
, CORDED USE
• Connectthechargingadaptortotheproductthentothemains.
• Whenthecordisconnectedtothemains,adigitaldisplaywillbedisplayedonthe 
appliance (HC5800).
FCAUTION: Extended mains only use will result in the reduction of the battery life.
F WARNING: The appliance can not be operated in corded mode while connected to a PC
via the USB port.
, CORDLESS USE
Whentheunitisswitchedonandfullycharged,theproductcanbeusedincordlessmode
for up to 60 minutes for the HC5400 and up to 120 minutes for the HC5600 & HC5800.
C HOW TO USE
, BEFORE STARTING THE CUT
• Inspecttheclippermakingsurethatitisfreefromhairanddirt.
• Seatthepersonsothattheirheadisapproximatelyatyoureyelevel.
• Beforecutting,alwayscombthehairsoitistanglefreeanddry.
Comb position Adjustable stubble comb (HC5800) Short comb Long comb
1 1 mm 3 mm 24 mm
2 3 mm 6 mm 27 mm
3 5 mm 9 mm 30 mm
4 7 mm 12 mm 33 mm
5 9 mm 15 mm 36 mm
6 11 mm 18 mm 39 mm
7 13 mm 21 mm 42 mm
, TO ATTACH A COMB
• Holdthecombwithitsteethupward.
• Slideitontoandalongtheclipperbladeuntilthefrontofthecombrmlysitsagainst
the clipper blade.
, TO REMOVE THE COMB
• Holdingtheclipperwiththebladesfacingawayfromyou,rmlypushthecomb 
upward and away from the blades.