Manual

Thorough Cleaning (cont’d)
TO DISASSEMBLE AND CLEAN THE TORCH CAM™ BREECH BLOCK AND
FIRING PIN ASSEMBLY: (cont’d)
6. With the breech block screw removed, carefully release pressure from the firing pin assembly and remove the
firing pin retainer, firing pin, and firing pin spring from the Torch Cam™ breech block. (See
Picture 29).
7. Spray the firing pin retainer, firing pin, and firing pin spring and the inside of the Torch Cam™ breech block
with Rem™ Action Cleaner to remove any debris or build up from the components. Dry thoroughly before
reassembling.
8. Spray the face of the Torch Cam™ breech block with Rem™ Action Cleaner and wipe clean with a soft cloth.
Insure that all components are dry prior to reinstalling.
9. Lightly lubricate the firing pin and firing pin spring with Rem™ Oil.
10. Spray the Torch Cam™ detent ball with Rem™ Action Cleaner. (See
Picture 30).
11. With a small punch or screwdriver, gently depress and release the Torch Cam™ detent ball to insure it moves
forward and returns freely. (See
Picture 31).
TO RESASSEMBLE THE TORCH CAM™ BREECH BLOCK AND FIRING PIN ASSEMBLY:
1. Place the firing pin back into the firing pin retainer as shown in (See Picture 32).
2. Place the firing pin spring on top of the firing pin/firing pin collar as shown in (See
Pictur
e 33
).
27
Picture 29
Pictur
e 30
Pictur
e 31
Picture 32 Picture 33
Firing Pin Retainer
Firing Pin
Firing Pin Spring