Operation Manual

5
• To retract the trimmer, push the top rear of the trimmer downward until it
locks under the trimmer release button.
E Tips for best results
• Ensure your skin is dry. Always hold the shaver at right angles to the skin so
that all three heads are touching the skin with equal pressure.
• Use moderate to slow stroking movements. The use of short linear motions
in stubborn areas may obtain a closer shave, especially along the neck and
chin line.
• DO NOT press hard against the skin in order to avoid damage to the foil
heads.
C CARE FOR YOUR SHAVER
• Care for your appliance to ensure a long lasting performance.
• We recommend you clean your product after each use.
• The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head after use with warm water.
• Keep the switch in the “o” position when not in use.
, DRY CLEANING
• Ensure the appliance is switched o and unplugged from the mains.
• Pull the foil assembly up to remove from the hair pocket.
• Tap out the excess hair shavings and use a cleaning brush if necessary.
• Do not clean the shaving foil with a brush.
• Replace the head assembly.
, WASHABLE CLEANING
• Ensure the shaver is switched o and unplugged from the mains.
• Pull the foil assembly up to remove from the hair pocket.
• Foils – do not use the brush to clean the foils. Instead, rinse the foils under
cold or warm water.
• Cutters and Trimmers – Rinse any loose hairs away in cold or warm water.
Do not use hot water.
• After cleaning, replace the head assembly.
• Do not submerge in water as damage will occur.
, CLEANING TRIMMER
• Lubricate the teeth of the trimmer every six months with a drop of sewing
machine oil.