Operation Manual

E Tips for best results

• Always hold the shaver at right angles to the skin so that all foils are

touching the skin with equal pressure.

• Usemoderatetoslowstrokingmovements.Theuseofshortlinearmotions

in stubborn areas may obtain a closer shave, especially along the neck and

chin line.

• DONOTpresshardagainsttheskininordertoavoidirritationanddamage

to the foil heads.

C CLEANING AND MAINTENANCE

• To ensure long lasting performance clean after each use.

• Ensure the appliance is switched o and unplugged from the mains.

• The easiest and most hygienic way to clean the appliance is by rinsing the

appliance head after use with warm water.

, DRY CLEANING

• Pull the foil assembly up to remove from the hair pocket.

Gently tap out the excess hair shavings and use a cleaning brush to clean

out the hair pocket if necessary.

Note: Do not use a brush to clean the shaving foils.

Replace the head assembly.

, WASHABLE CLEANING

• Pull the foil assembly up to remove from the hair pocket.

• Do not use the brush to clean the foils but blow the shavings out or rinse in

running water.

• Use the cleaning brush to sweep any loose hairs from the cutter and

trimmer. Rinse in running water.

• Replace the head assembly.

• Lubricate the teeth of the trimmer every six weeks with a drop of sewing

machine oil.

, REPLACING THE FOILS & CUTTERS

• To ensure continued high quality performance from your shaver, we

recommend the foils and cutters are replaced regularly.

, Signs that your foil/s and cutter/s need replacing

• Irritation: as foils get worn, you may experience skin irritation.

• Pulling: as the cutters wear, your shave may not feel as close and you may

feel the cutter pulling your hair.