SDS

Page 3 of 4
SDS for: Rem Oil Liquid
Printed: 7/09/2015
8. EXPOSURE CONTROL/PERSONAL PROTECTION
Chemical Name / CAS No.
OSHA Exposure Limits
ACGIH Exposure Limits
Other Exposure Limits
PETROLEUM DISTILLATE
8052-41-3
Not established
TLV-TWA: 400 ppm
PETROLEUM OIL
64742-52-5
PEL: Mist 5 mg/m3, 8 hrs
TLV: Mist 5 mg/m3, 8 hrs
Appropriate engineering controls: Ventilation should be sufficient to prevent inhalation of any vapors . General
dilution and/or local exhoust ventilation in volume to keep PEL/TLV of most hazardous ingredient below acceptable
limit and lel below stated limit.
Individual protection measures:
Respiratory protection: None under normal use. Avoid breathing vapors. In restricted areas , use approved
chemical/mechanical filters designed to remove a combination or particles and vapor. In confined areas, use an
approved air line respirator or hood. Self-contained breathing apparatus is required for vapor concentrations above
PEL/TLV limits.
Protective gloves: None under normal use. Use solvent-resistant for prolonged or repeated contact.
Eye protection: None under normal use. However, use of safety glasses with splash guards or full face shield should
be used if indicated.
Other protective clothing or equipment: None under normal use. However, use of solvent- resitant aprons or other
clothing is recommended. Eye washes and safety showers in the workplace are recommended.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Sl. Hazy liquid
Vapor Pressure:
Not determined
Vapor Density:
Heavier than air
Density:
0.81458835
Freezing point:
Not determined
Boiling point:
N/A
Evaporation rate:
Slower than ether
Explosive Limits:
Not determined
Autoignition temperature:
Not determined
Viscosity:
Not determined
Odor:
Solvent
Odor threshold:
Not determined
pH:
Not applicable
Melting point:
Not determined
Solubility:
Not determined
Flash point:
>105 F
Flammability:
Combustible
Partition coefficient (n- Not determined
octanol/water):
Decomposition temperature:
Not determined
10. STABILITY AND REACTIVITY
Reactivity: Not reactive under normal conditions of use.
Chemical stability: Stable under normal storage and handling conditions.
Possibility of hazardous reactions: None known.
Incompatible materials: Strong oxidizing agents.